int VW0,X10,X11
bool X12,X13=0,X14=1
X10=10
GetData(X12, "Local HMI", LB, 9060, 1) //X12从LB9060中获取密码输入是否错误。
if X12 then
SetData(X14, "Local HMI", LB, 15, 1)/
else
SetData(X10, "Siemens S7-200 (VD any address)", VW, 0, 1
end if
我这个触发了不会执行
那有问题啊?
我在放了LB9060的显示元件 一直没反应! |